We provide the best market raw materials market and production facilities.
All the raw materials needed for the production of Bioethanol and Biodiesel and something more, you can purchase through us, and you will find the best prices in the market.

Just contact us.




PRODUCTION PLANTS
We offer an innovative process (know how), with a detailed manual for the manufacture of biodiesel (fatty acid ester alcohol) from any new or used vegetable oil with acid number up number 9.


Product Description
By definition, they are mixing reactors, which are pressurized, have electric heating and mixing technology used for high speed. They are also equipped with fiberglass insulation, automatic temperature and pressure process.
The construction is done in stainless steel 304. The components used are readily available throughout the world; the design philosophy was to adopt universal standards in materials and components. The construction complies with the standards IRAM, DIN and ASTM for industrial safety, and environmental..
The mixers do not generate effluents. They are vented to evacuate the fumes of alcohol that could be generated during filling.
The control panel is sealed, the electrical wiring is piped. All circuitry has self-protection, in addition to the general protection of the board.

Operation Module
In principle, the oil is decanted and filtered, then heated and dehydrated in the dryer, which produces vacuum to do a relative low temperature.
In the reactor the alcohol is vacuumed and the mixing gets started. Then we pour the recalculated alkali for an entry at the top. Then we must pass 200 l. of oil from the dryer to the hot reactor. Is closed and pressurized vent (the compressor is included in the module) enabling the timer and immediately heating circuit.
When the mixing time is up, turn off the circuit for heating and maintaining the pressure, the expected time required for separation to occur by natural decantation of glycero and biodiesel.
Applying pressure to the reactor, the glycerol is exhausted first and then the biodiesel is extracted by passing the five-micron filter before storage. The filtrated Methyl obtained is ready for use immediately, not requiring any post procedures. Each cycle reaction-decantation-filling is completed in 10-11 hours, and then two mixtures can be made daily.

Alternate Line
• MODULE I (minimum module), to produce 400 liters per day includes 1 dryer BD2+ 1 reactor BD2D + 1 air compressor SAT-2 1.5 HP.

• MODULE II –to produce 800 Lts per day includes: 1 minimum module + 1 DECANTER BD2E.

• MODULE III –for the production of 1200 Lts per day includes: MODULE + 2 DECANTERS BD2E.

• MODULE IV –for the production of 1600 Lts per day includes: 1 MODULE I + 3 DECANTERS BD2E.

• MODULE V –for the production of 2000 Lts per day includes: Module I + 4 DECANTERS BD2E.

• MODULE VI –for the production of 2400 Lts per day includes: MODULE BD4 + 2 DECANTERS BD4E.

• MODULE VII –for the production of 3200 Lts per day includes: MODULE BD4 + 3 DECANTERS BD4E.

• MODULE VIII –for the production of 4000 Lts per day includes: MODULE BD4 + 4 DECANTERS BD4E.


Additionally, to complete the process of self-offering we offer “Mini oil mill” (screw presses) to produce oil from oil seed.
The mixer comes with a complete installation Manual and Dosing operation.
Also if required by the customer is the service assembly, service, maintenance and repair, which is listed separately.
Another intangible is the guarantee of all MODULES available, which is 12 months.
Finally a service offered for after the expiration of the warranty period is the service to send replacements for broken pieces.